Low pressure and an advancing meter can occur during the same period, but they answer different questions. Pressure describes supply conditions at an outlet; meter movement records water passing a measuring point. For leak detection in Crowthorne, each observation should be confirmed separately before they are combined into a hidden-leak theory.
Describe the pressure symptom by outlet
Record whether the change affects every cold tap, hot water only, an upstairs outlet or one fitting. Note the time and whether neighbours report a similar change. Check the water company’s incident information before assuming the problem sits within the property.
Do not adjust pressure-reducing valves, boiler controls or a stiff stop tap. A partially closed valve, peak demand or network work can alter flow. Video can show an outlet behaving differently, but it does not provide a pressure measurement unless suitable equipment was used.
Run a separate, accountable meter observation
Identify the correct meter and photograph its serial or location as well as the display. List toilets, appliances, irrigation and automatic equipment that could use water. Follow supplier guidance and record every use during the interval; shared supplies require extra care and should not be isolated casually.
If the display changes, describe only that water passed through the meter. The result does not locate the route or prove it caused the pressure change. Retain both readings and the exact times.
Give the investigator two facts, not one diagnosis
Tell the supplier or leak-detection specialist in Crowthorne which outlets were affected, whether the wider area had a supply issue, and what the meter did during a controlled interval. That allows network conditions, internal fittings and the supply pipe to be considered in a sensible order.
Seek urgent help for a substantial escape, ground movement, loss of supply or water near electrics. After any network update or repair, repeat the same outlet comparison before repeating a meter test. If pressure returns but unexplained flow remains, the two symptoms were not fully explained by one event.
Check the outcome with the same comparison
When the supplier closes an incident or a plumber completes work, note the date and repeat the original outlet observations at a similar time. Record which taps recovered and whether any single fitting still behaves differently.
Keep the original meter photographs alongside the later readings. A lower total across a different interval is not directly comparable, so state duration and household use. The aim is to confirm which symptom changed, rather than declare success from a general impression.
Further reading
Prepared with AI assistance using the sources listed above. General information cannot diagnose an individual property. Contact us to discuss your circumstances.
Would you like to talk it through?
Tell us what you have noticed and request a callback for further information.
Arrange a call