A tundish is intended to make certain safety discharges visible. Water passing through it should not be capped, bypassed or treated as an ordinary nuisance drip. For leak detection in Chertsey, the useful homeowner task is to record when discharge occurs and obtain qualified assessment of the hot-water system.
Identify the component without altering it
Photograph the tundish and surrounding plant area from a safe distance. Note labels on the cylinder and controls, but do not remove covers. Record whether the water is a drip, intermittent stream or continuous flow.
Never plug the tundish, tie a valve, or join the discharge into an unseen container. It forms part of a safety arrangement and must remain visible and correctly routed.
Link discharge to normal events
Write down hot-water heating times, recent draw-off and whether the discharge starts during heat-up or afterwards. Note system pressure only from normally visible displays. Do not operate safety valves to test them.
Include recent servicing, loss of power or control changes. These facts help the qualified engineer understand the sequence without implying which safety or control component is responsible.
Use appropriately qualified help
Unvented hot-water systems require competent assessment. Provide the timeline and video when arranging investigation in Chertsey, and state clearly that the observed water passes through the tundish.
If discharge is heavy, very hot, entering the building or creating an electrical hazard, keep people away and seek urgent assistance. Do not isolate unfamiliar safety controls.
Record the system left in service
After work, ask what caused the discharge, what was changed and how operation was checked. Keep the service documentation and a photograph of the unobstructed tundish.
Observe only during ordinary hot-water cycles as advised. A dry tundish after repair is meaningful when paired with correct system operation; silence caused by a blocked or rerouted discharge is not a safe outcome.
Protect the discharge route
Check from ground level that the external termination remains clear and does not create a scalding or slip risk. Do not shorten, cap or redirect it for cosmetic reasons. Record whether the outlet is safely visible.
If the route crosses a cupboard, note stored items that could hide a future discharge. Keep the viewing point accessible. A safety warning is useful only when occupants can see it and know who to contact. Add the engineer’s emergency instructions to the cylinder record.
Further reading
Prepared with AI assistance using the sources listed above. General information cannot diagnose an individual property. Contact us to discuss your circumstances.
Would you like to talk it through?
Tell us what you have noticed and request a callback for further information.
Arrange a call